Toshiba PORTEGE R400 Maintenance Manual page 281

4 Replacement Procedures
2. Remove the LCD mask while inserting your fingers in the slots.
CAUTION: When removing the LCD mask, be careful not to break the glass portion of
the LCD mask.
LCD mask
Installing the LCD mask
The following describes the procedure for installing the LCD mask. (See Figure 4-40 and 4-
41.)
1. Install the LCD mask while engaging the latches.
NOTE: When installing the LCD mask, wipe the LCD with a soft cloth and make the back
of the LCD mask clean with an ionizer.
2. Secure the LCD mask with the following screws and stick the mask seals (3 points)
and rubber masks (2 points).
• M2.5×6B
4-62 [CONFIDENTIAL]
Figure 4-41 Removing the LCD mask (2)
FLAT HEAD screw
Slot
×5
PORTÉGÉ R400 Maintenance Manual (960-623)
4.24 LCD mask