Table of Contents
Advertisement
4.7 Memory module A
4.7
Memory module A
CAUTION: The power must be turned off when you remove the memory module.
Removing the memory module with the power on risks damaging the module
or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may
cause memory access problems.
Never press hard or bend the memory module.
Removing the memory module A
To remove the memory module A, make sure the computer is in boot mode and powered off.
Then perform the following procedure. (See Figure 4-11.)
1. Turn up the memory slot cover.
2. Open the left and right latches outside and remove the memory module A.
Memory slot cover
PORTÉGÉ R400 Maintenance Manual (960-623)
Figure 4-11 Removing the memory module A
4 Replacement Procedures
Memory module A
Latch
Latch
[CONFIDENTIAL]
4-21
Advertisement
Chapters
Table of Contents
