Table of Contents
Advertisement
4.15 3G card
Installing the 3G card
To install the 3G card, follow the steps below. (See Figure 4-26.)
CAUTION: Be sure to switch the computer off before installing the 3G card. Otherwise,
the computer or the 3G card may be damaged.
1. Insert the 3G card to the connector CN2610 on the system board slantwise and press
it to connect firmly.
2. Connect the 3G antenna cables to the connectors on the 3G card.
3. Secure the 3G card with the following screws.
• M2×4B
4. Stick the glass tape in place.
PORTÉGÉ R400 Maintenance Manual (960-623)
×2
BIND screw
4 Replacement Procedures
[CONFIDENTIAL]
4-45
Advertisement
Chapters
Table of Contents
