Toshiba PORTEGE R400 Maintenance Manual page 225

4 Replacement Procedures
Screw Tightening Torque
Use the following torque when tightening screws.
CAUTION: Overtightening may damage screws or parts. Undertightening may allow
screws to loosen (and possibly fall out) causing a short circuit or other
damage.
NOTE: To tighten screws quickly and accurately, an electric screwdriver is
recommended.
•
M2 (2mm)
•
M2.5 (2.5mm)
•
M3 (3mm)
NOTE: To prevent damage to THIN HEAD screws, use type 0 bit philips screwdriver.
Use, however, the PH point size "1" screwdriver for screws fixing the memory
slot cover and keyboard. Press along the axis of the screwdriver while turning
the screw. This is because the contact area between the screw and driver is less
than for a pan head screw (standard pan-shaped screw head).
4-6 [CONFIDENTIAL]
0.167 N•m (1.7 kgf •cm)
0.294 N•m (3.0 kgf•cm)
0.549 N•m (5.6 kgf•cm)
PORTÉGÉ R400 Maintenance Manual (960-623)
4.1 Overview