Toshiba PORTEGE R400 Maintenance Manual page 276

4.22 PC card slot
4.22 PC card slot
Removing the PC card slot
The following describes the procedure for removing the PC card slot. (See Figure 4-37.)
1. Remove the following screws.
• M2×4B BIND screw
2. Remove the PC card slot from the connector CN2110 on the system board.
Installing the PC card slot
The following describes the procedure for installing the PC card slot. (See Figure 4-37.)
1. Connect the PC card slot to the connector CN2110 on the system board.
2. Install the PC card slot to the slot and secure it with the following screws.
• M2×4B BIND screw
PORTÉGÉ R400 Maintenance Manual (960-623)
×2
M2x4B BIND
Figure 4-37 Removing the PC card slot
×2
4 Replacement Procedures
M2x4B BIND
PC card slot
CN2110
[CONFIDENTIAL] 4-57