Table of Contents
Advertisement
4.4 Memory module B
4.4
Memory module B
CAUTION: The power must be turned off when you remove the memory module.
Removing the memory module with the power on risks damaging the module
or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may
cause memory access problems.
Never press hard or bend the memory module.
Removing the memory module B
To remove the memory module B, make sure the computer is in boot mode and powered off.
Then perform the following procedure. (See Figure 4-3.)
1. Loosen the screw (with an e-ring).
2. Insert your fingers into the slots and remove the memory slot cover.
3. Open the left and right latches outside and remove the memory module B.
PORTÉGÉ R400 Maintenance Manual (960-623)
Memory slot cover
Latch
Figure 4-3 Removing the memory module B
4 Replacement Procedures
Screw (e-ring)
Latch
Memory module B
[CONFIDENTIAL]
4-11
Advertisement
Chapters
Table of Contents
