4 Replacement Procedures
Installing the Front panel/Microphone
The following describes the procedure for installing the front panel/microphone. (See Figure
4-15 to 4-18.)
1. Peel off the separate sheet of the double-sided tape on the back and stick the aux
display to the aux display holder.
CAUTION: Do not reuse the removed aux display.
Bend the aux display cable portion toward the arrow pointing.
Do not touch the IC of the aux display cable.
Aux display cable
4-30
[CONFIDENTIAL]
4.10 Front panel/Microphone
IC
Double-sided tape
PORTÉGÉ R400 Maintenance Manual (960-623)
Separate
sheet of the
double-sided
tape