Toshiba PORTEGE R400 Maintenance Manual page 261

4 Replacement Procedures
4.14 Wireless LAN card
Removing the Wireless LAN card
To remove the Wireless LAN card, follow the steps below. (See Figure 4-25.)
CAUTION: Do not try to remove the wireless LAN card with the computer turned on. It
may cause damages to the computer or the wireless LAN card. Do not touch
the connectors on the wireless LAN card on the computer. Debris on the
connectors may cause the wireless LAN card access problems.
1. Remove the following screws.
• M2×4B
2. Disconnect the wireless LAN antenna cables (black and white) from the wireless
LAN card using an antenna coaxial cable disconnector.
3. Disconnect the wireless LAN card from the connector CN2600 on the system board.
Wireless LAN card
4-42 [CONFIDENTIAL]
BIND screw
Figure 4-25 Removing the Wireless LAN card
×2
CN2600
Wireless LAN antenna
cable (white)
Wireless LAN antenna
cable (black)
PORTÉGÉ R400 Maintenance Manual (960-623)
4.14 Wireless LAN card
M2×4B BIND