Table of Contents
Advertisement
With the DRPD feature active, ÔDRPDÕ appears in the display and the
previously set reception mode is ignored. If you turn DRPD off, the
machine returns to any previously set reception mode.
Notes:
¥ DRPD must be set up again if you re-assign your fax number, or connect the
¥ After DRPD has been set up, call your fax number again to verify that the
¥ SEND FROM MEMORY ÑIf you are annoyed that you have to wait
¥ LOCAL IDÑThis feature allows the machine to automatically print the
¥ PRIORITY TERM (SF-5800P Only) ÑWhen you want to print a PC
¥ CLOCK MODEÑThis feature is to select the time format.
¥ FLASH TIME
2.42
Other Functions
machine to another telephone line.
machine answers with a fax tone, then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT.LINE jack.
until documents in the feeder are sent out when you try to send or
reserve another fax, turn this feature on. This feature enables all
transmission documents are automatically scanned into memory before
transmission.
Press 1 to turn this feature on.
Press 2 to turn this feature off.
page number, and the date and time of the reception at the bottom of
each page of a received document.
Press 1 to turn this feature on.
Press 2 to turn this feature off.
document while the machine prints a received fax on the recording paper,
you can interrupt the printing and print the PC document. Press the Print
Priority button to enable the feature. The interrupted fax data will be
stored in memory. To disable, press the Print Priority button again.
You can set your machine to turn the feature off automatically if there is
no further data printed within 30 minutes or 8 hours after PC printing.
Press 1 to select 8 hours. The machine turns off automatically 8 hours
after PC printing is completed.
Press 2 to select 30 minutes. The machine turns off automacally 30
minutes after PC Printing is completed.
Press 1 to select 12 hour format.
Press 2 to select 24 hour format.
Press 1 to select 100ms.
Press 2 to select 280ms.
Press 3 to select 600ms.
Advertisement
Table of Contents
