Table of Contents
Advertisement
¥ AUTO JOURNALÑA journal shows specific information concerning
transmission or reception activities, the time and dates of up to 50 of the
most recent transmissions or receptions.
Press 1 to print journal automatically after every 50 transmissions or
receptions (ON).
Press 2 to print journal manually (OFF).
¥ REMOTE CODEÑThe remote receive start code allows you to initiate
fax reception from an extension phone plugged into the EXT.LINE jack on
the back of your machine. If you pick up the extension phone and hear
fax tones, enter the remote code and the machine will start receiving. The
password is preset to
Enter the desired code 0 to 9 on the number keypad.
¥ POWER SAVE (SF-5800P Only) ÑThe power saving menu item lets you
reduce power usage when the printer is idle.
Press 1 to turn the feature ON. The display asks you to determine the
length of time the printer waits after a job is printed before it goes to a
reduced power state:
Press 1 for 10 minutes, 2 for 15 minutes, 3 for 30 minutes, 4 for 45
minutes, or 5 for 60 minutes.
If your printer is used constantly, press 2 to turn the feature OFF. It keeps
the printer ready to print with the minimum warm-up time.
¥ DIAL MODEÑSelect the type of dial system your fax machine is
connected to.
Press 1 if the fax machine is connected to a tone (Touch Tone) dial line.
Press 2 if the fax machine is connected to a pulse (Rotary) dial line.
¥ ECM MODE (Error Correction Mode)ÑThis mode compensates for poor
line quality and ensures accurate, error-free transmission with any other
ECM-equipped facsimile machine. If the line quality is poor, transmission
time may be increased when ECM is enabled.
Press 1 to turn the Error Correction mode on.
Press 2 to turn the Error Correction mode off.
9
at factory.
2.39
Other Functions
Advertisement
Table of Contents
