Table of Contents
Advertisement
2.26
Making a Copy
To set copy options:
1. Load a document with the print side facing down. If necessary, adjust
Contrast button to change the contrast. For details on the Contrast, see
page 2.8.
2. Press Copy. The display asks you to enter the number of copies (1 to 99).
3. If you need two or more copies, enter the desired number using the
dial keypad, then press
number of copies. The display shows the next option; copy rate menu.
4. If you want to reduce or expand the image size, press 2, enter the
number of the desired copy rate, then press
If not, press 1.
5. The display asks you to choose how to collate. There are two ways to
collate multiple copies; OFF and ON.
The ÔOFFÕ is the stacking method. This will make ÔnÕ copies of page
one, ÔnÕ copies of page two, and so on. These will all be stacked on top
of each other. The second method ÔONÕ is the sorting method. This will
make 1 copy of page 1, 2, 3, 4, in order, then makes a second copy of 1,
2, 3, 4 until a total of ÔnÕ copies has been made.
OFF
1
1
1
Press 1 or 2 to choose the desired collation method. You can also
press
without setting the collation. The LCD display scrolls back
and shows the first option; number of copies.
6. Press Copy to begin the copy operation.
Note: When you set the copy options, pressing Copy anytime begins the copy
operation immediately without displaying the remaining options.
COPY
[01-99]
<01>
. You can also press
REDUCE/ENLARGE
1:AUTO 2:MANUAL
ENTER RATE
[50-200]
<100>
[COPY COLLATE]
1:ON 2:OFF
2
2
2
without setting the
. Go to step 7.
ON
3
2
2
1
1
3
Advertisement
Table of Contents
