Table of Contents
Advertisement
1.6
Set Up Your Machine
Handset and Handset Cradle
(only for the machine equipped with handset)
1. Plug one end of the coiled cord into the jack on the handset. Then
plug the other end into the modular jack on the bottom of the
handset cradle.
Cradle
2. Plug the cradleÕs modular cords into the modular jacks on the left
side of your machine.
Attach the handset cradle to the main body. Insert the three tabs of
the cradle into the slots on the left side of the main body as shown,
and push it up.
Black cord
Route the excess cord so that it could be
inserted into the cradle.
Handset
Advertisement
Table of Contents
