Table of Contents
Advertisement
Chain Dialling
When using special computer services, such as alternate long distance
carriers, credit card calls, or bank-by-phone, you must dial the telephone
number of the service and wait for the computer to answer before
continuing. The length of time before the computer answers can vary, so
using a pre-programmed pause after a service number is not advised.
However, you can store your ID number, for example, in one memory
location and the rest of the information, such as your card number, in
another memory location.
Dial the phone number of the special service first. Then, when the
computer answers, dial the rest of the information, such as a long-distance
number. We call this procedure Chain Dialling.
You can combine regular dialing using the dial keypad and/or One-Touch
Dialling for a Chain Dialling
Note: You can not use 2-digit Speed Dialling, Group Dialling, and /or redial
number for Chain Dialling.
Status
Your machine can perform more than one of the many functions at the
same time. For example, you can simultaneously:
¥ Receive a fax into memory while making a copy.
¥ Store a fax document for later transmission while printing an incoming fax.
¥ Print an incoming fax document while scanning a document to the PC.
(SF-5800P only)
¥ Receive a fax into memory while printing a PC document. (SF-5800P only)
¥ Print a PC document while sending a fax. (SF-5800P only)
When the machine performs dual tasks, Press Speed/Status to toggle the
display between the current operation and new operation.
2.35
Other Functions
Advertisement
Table of Contents
