This machine may not enter the sleep mode after the set period of time since the fan is working until this machine
has cooled down depending on the printing environment or the usage conditions.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «POWER SAVE» to restore.
2
Press «Fn» on the operator panel.
3
Input «2», «0» and «1» using the numeric keypad, and press «OK».
4
Press the scroll button ▲ or ▼ to select the time to set, and press «OK».
5
Press «ON LINE» to return to the standby screen.
Restrictions of the power save function
The sleep mode will not be entered in the following cases.
When an error has occurred to this machine
When access control is enabled for the access control settings, and local IC card authentication or LDAP
IC card authentication is enabled for the authentication method
Turning off the power automatically (Auto Power Off)
This machine comes with a function (Auto Power Off) to turn off the power automatically if it has not been
used for a certain period of time.
There are 3 types of settings for Auto Power Off, and the default factory setting is [Auto Config].
Changing settings from the operator panel
- 99 -