Oki C650 User Manual page 124

Item
Flash Initialize
Memory
Format Partition
Setup
Job Log Save Job Log
Setup Clear Job Log
Security Access Control
Setup
User Counter Report
Language Select Language
Setup
Job Cancel Cancel Key Behavior
Setup
Inquiry Display
Focus Position
Display Timeout
Near Life Drum Near Life Timing
Setup
Fuser Near Life Timing
Belt Near Life Timing
Erase Privacy Data
NFC Setup
Changing settings from the operator panel
Factory
default
settings
Execute Initializes the flash memory.
PCL Formats the specified partition of a flash
memory.
Disable Sets whether to save a log of print data.
Execute Clears the log of saved print data.
Displayed when [Save Job Log] is enabled.
Disable Sets whether to enable access control.
Execute Prints a user counter report. Displayed
when access control is set to [Enable] and
[Save Job Log] is enabled.
English Selects the display language of the display.
Short Sets the actions when the cancel button is
pressed.
Short: A short press (for 2 seconds or less)
cancels the printing.
Long: A long press for 2 to 5 seconds
cancels the printing.
Off: Pressing the cancel button does not
cancel the printing.
On Sets whether to display a screen to confirm
whether to cancel the printing.
Yes Sets whether to select [Yes] or [No] as the
default on the job cancel inquiry screen.
180 Sets the waiting time in seconds before a
button is pressed on the job cancel inquiry
screen. When the waiting time has passed,
the printing will be continued instead of
being canceled.
1500 Sets whether to display the number of
copies before the image drum is
approaching the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
1500 Sets whether to display the number of
copies before the fuser unit is approaching
the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
1500 Sets whether to display the number of
copies before the belt unit is approaching
the end of its service life.
Value range: 500 to 5,000 (in increments of
500)
Execute Erases the following data set in this
machine.
• Admin password, values set in various
menus
• Various records
• Access control registered to this machine,
user information
Enable Enables/Disables the NFC function.
- 124 -
Description