9
Press «OK» again to complete inputting the admin password and display [Admin Setup].
Changing the admin password
The admin password can consist of 1 to 32 digits.
The following characters can be used for the admin password.
Upper-case letters
Lower-case letters
Figures
Symbols: [Space] ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [
Be sure to write down the password you set just in case you forget.
If you forget the changed password, you cannot change [Admin Setup] or [Boot Menu].
If you wish to reset the password, the charged service by maintenance staff will be necessary.
If the machine is in the power save mode, press «POWER SAVE» to restore.
This section describes how to change the factory default admin password as an example.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «POWER SAVE» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and
press «OK».
3
Input the factory default admin password.
Inputting the factory default admin
4
Press the scroll button ▲ or ▼ on the operator panel several times to select [Change
Password], and press «OK».
passwords(P.196)
- 197 -
Management of this machine
] ^ _ ` { | } ~