Oki C650 User Manual page 123

Near Life LED
Idle display
Panel Contrast
Buzzer Setup Error Volume
Print Completion Buzzer Volume
AirPrint Buzzer Volume
Card Hold Buzzer Volume
Time Setup Date Format
Time Zone
Daylight Saving
Setting method
SNTP Server(Primary)
SNTP Server(Secondary)
Time Setting
Power Setup Auto Power Off
Tray Setup Unit of Measurement
Default Paper Size
Others Setup Paper Feed
Roller
Counter
Clear
Item
MP Tray Clear
Tray1 Clear
Tray2 Clear
Tray3 Clear
Tray4 Clear
Changing settings from the operator panel
Factory
default
settings
Enable Sets whether to light the «ATTENTION»
lamp when the supplies or maintenance
parts are approaching the end of service
life.
Toner Gauge Selects the information to be displayed on
the standby screen.
0 Adjusts the contrast of the display.
Value range: -10 to +10
Off Sets the buzzer volume when an error
occurs.
Off Sets the buzzer volume when the printing
has completed.
Low Sets the volume of the AirPrint buzzer.
Low Sets the buzzer volume when the IC card is
held.
Displayed when access control is enabled.
yyyy/mm/dd Sets the date in the format of yyyy/mm/dd.
+9:00 Sets the GMT time zone.
Value range: -12:00 to +13:00 (in
increments of 15 minutes)
Off Sets the daylight saving (daylight saving
time).
Manual Selects how to set the time.
Setup
(Blank) Sets the SNTP server used to set the
current date and time. Up to 64 characters
(Blank)
can be used.
Displayed when [Auto Setup] is selected as
the setting method.
2001/01/01 The time is set at factory delivery. Change
00:00:00 the date and time if necessary.
Displayed when [Manual Setup] is selected
as the setting method.
Auto Config Sets the operation of Auto Power Off.
Auto Setup: Auto Power Off does not work
for network (wired/wireless) connection.
Enable: Auto Power Off works regardless of
the connection method.
Disable: Auto Power Off does not work.
millimeter Sets the unit of measurement for the custom
size (mm/inch).
A4 Sets the default paper size of a custom size.
Execute Clears the counter after the paper feed roller
of the MP tray is replaced.
Execute Clears the counter after the paper feed roller
Tray 1 is replaced.
Execute Clears the counter after the paper feed roller
Tray 2 is replaced.
Execute Clears the counter after the paper feed roller
Tray 3 is replaced.
Execute Clears the counter after the paper feed roller
Tray 4 is replaced.
- 123 -
Description