3
Then, mount the anti-tip foot b (x 3) to both sides and the back.
4
Check that the anti-tip foot a and the anti-tip foot b (x 3) are inserted in place by turning the
dedicated caster stand upside down.
5
Turn the dedicated caster stand back and mount the positioning pin (x 2). Rotate to fix the
positioning pin (x 2) with a flat-head screwdriver.
6
Turn off this machine and remove the power cord and all cables.
Installation with a cable connected may cause you to get caught in the cable and get injured.
7
Lock the caster (2 places) to prevent the dedicated caster from moving during the installation of
the main unit and the expansion tray.
Connecting to the PC after preparing the device
- 29 -