Step 2: Unpack the PTX3000
For detailed instructions on how to unpack the shipping crate and verifying the parts received, see the
PTX3000 Packet Transport Router Hardware
Step 3: Install the PTX3000 Mounting Hardware
To install the mounting hardware, perform the following procedures:
Install Cage Nuts, If Needed | 7
1.
Install the Mounting Shelf | 8
2.
Install Cage Nuts, If Needed
Insert cage nuts on the front rack rails, if needed. The hole distances are relative to the standard U division
on the rack that is aligned with the bottom of the mounting shelf.
To install cage nuts on the front rack rails:
1. Insert cage nuts in the holes specified for the mounting shelf (see
NOTE:
A mounting shelf is not required to install the PTX3000.
Table 1: Mounting-Hole Locations for Installing a PTX3000 Mounting Shelf
Hole
1
2
2. Insert cage nuts in the holes specified for mounting the chassis (see
Guide.
Distance Above U Division
0.02 in. (.06 cm)
0.2 in. (0.4 cm)
Table 1 on page
7).
0.01 U
0.08 U
Table 2 on page
8).
7