Mr-Aepb2J10Cbl03M-_-L/Mr-Aep2J10Cbl03M-_-L - Mitsubishi Electric MELSERVO-J5 HK Series User Manual

MR-AEPB2J10CBL03M-_-L/MR-AEP2J10CBL03M-_-L

These cables are motor cables for the HK-KT series rotary servo motors. The servo amplifier and the rotary servo motor
cannot be connected by these cables alone. The servo amplifier-side encoder cable (MR-AEKCBL_M-_) is required.
Model
The following describes what each block of a model name indicates. Not all combinations of the symbols are available.
M R - A E P B 2 J 1 0 C
Connecting the servo amplifier and rotary servo motor
MR-J5 1-axis
servo amplifier
CN2
MR-J5 multi-axis
servo amplifier
CN2A
CN2B
CN2C *1
*1 This connection is for the MR-J5 3-axis servo amplifier.
*2 Refer to the following for connection of the power connector.
Page 35 Wiring
B L 0 3 M - A 1 - L
Flex type
Symbol
L
Outlet direction
Symbol
A1
A2
A5
Cable length
Symbol
03
Electromagnetic brake cable
Symbol
×
B
MR-AEPB2J10CBL03M-_-L
MR-AEP2J10CBL03M-_-L
MR-AEKCBL_M-_
*2
(1)
Flex type
Standard (for fixed parts)
Outlet direction
Load-side lead
Opposite to load-side lead
Vertical lead
Cable length [m]
0.3
Electromagnetic brake cable
×
○
(2)
Rotary servo motor
5 WIRING OPTION
5.2 Motor cable/connector sets
5
71