Environment - Mitsubishi Electric MELSERVO-J5 HK Series User Manual

HK-ST/HK-RT (3.5 kW - 7.0 kW) series
The rating plate indicates the characteristic values for when the torque has been increased by changing the servo amplifier.
For the characteristics in combination with each servo amplifier, refer to "Servo amplifier/motor combinations" in the following
manual.
MR-J5 User's Manual (Hardware)
Input power, rated voltage, rated current, and rated output
Mass and insulation class
Rated speed
Induced voltage constant and maximum ambient temperature
Power factor and IP rating
Serial number
Country of origin
Manufacturer
1.3

Environment

Condition Operation
Ambient temperature 0 ˚C to 60 ˚C (non-freezing)
Ambient humidity 10 %RH to 90 %RH (non-condensing)
*1
Ambience Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist, dust, nor high magnetic field
Altitude 2000 m or less
Vibration resistance Refer to the following.
Page 101 Standard specifications
Page 143 Standard specifications
Page 189 Standard specifications
External magnetic field 10 mT or less
*1 Do not use in an environment where there is exposure to oil mist, oil, and water.
*2 Refer to the following for restrictions on the ambient temperature.
Page 117 Derating
Page 154 Derating
Page 194 Derating
*3 Refer to the following for restrictions on using this product at an altitude exceeding 1000 m and up to 2000 m.
Page 117 Derating
Page 154 Derating
Page 194 Derating
HK-ST102W
Model
3AC 102 V
5.2 CI. F
1500 r/min 0-
58
mV/min -1
P.F. 98 % IP67
M00001234 194
SER.
MADE IN JAPAN IEC60034-1
FABRIQUÉ AU JAPON IEC61800-3
TOKYO 100-8310 , JAPAN
*2
*3
AC SERVO MOTOR
SERVO MOTEUR AC
7.0 A 1kW
CONT
125 Hz
40°C
Transportation/storage
-15 ˚C to 70 ˚C (non-freezing)
10 %RH to 90 %RH (non-condensing)
1 INTRODUCTION
11
1.3 Environment
1