Wireless Lan Advanced Screen; Figure 66 Network > Wireless Lan > Mac Filter; Table 34 Network > Wireless Lan > Mac Filter - ZyXEL Communications ZyXEL NBG420N User Manual

Chapter 7 Wireless LAN
Figure 66 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 34 Network > Wireless LAN > MAC Filter
LABEL
Active
Filter Action
Set
MAC
Address
Apply
Reset

7.7 Wireless LAN Advanced Screen

Click Network > Wireless LAN > Advanced. The screen appears as shown.
102
DESCRIPTION
Select Yes from the drop down list box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the NBG420N, MAC addresses not listed will be
allowed to access the NBG420N
Select Allow to permit access to the NBG420N, MAC addresses not listed will be
denied access to the NBG420N.
This is the index number of the MAC address.
Enter the MAC addresses of the wireless station that are allowed or denied access to
the NBG420N in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Click Apply to save your changes back to the NBG420N.
Click Reset to reload the previous configuration for this screen.
NBG420N User's Guide