ZyXEL Communications ZyXEL NBG420N User Manual page 232

Chapter 20 System
Table 85 Maintenance > System > Time Setting
LABEL
End Date
Apply
Reset
232
DESCRIPTION
Configure the day and time when Daylight Saving Time ends if you selected
Daylight Savings. The o'clock field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October.
Each time zone in the United States stops using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select Last, Sunday, October and
type 2 in the o'clock field.
Daylight Saving Time ends in the European Union on the last Sunday of
October. All of the time zones in the European Union stop using Daylight Saving
Time at the same moment (1 A.M. GMT or UTC). So in the European Union you
would select Last, Sunday, October. The time you type in the o'clock field
depends on your time zone. In Germany for instance, you would type 2 because
Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Click Apply to save your changes back to the NBG420N.
Click Reset to begin configuring this screen afresh.
NBG420N User's Guide