ZyXEL Communications ZyXEL NBG420N User Manual page 43

Table 5 Screens Summary
LINK
LAN
DHCP
Server
NAT
DDNS
Security
Firewall
Content Filter Filter
VPN
Management
Static Route
Bandwidth
MGMT
Remote
MGMT
UPnP
Maintenance
NBG420N User's Guide
TAB FUNCTION
IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to partition your LAN interface into subnets.
Advanced Use this screen to enable other advanced properties.
General Use this screen to enable the NBG420N's DHCP server.
Advanced Use this screen to assign IP addresses to specific individual
computers based on their MAC addresses and to have DNS
servers assigned by the DHCP server.
Client List Use this screen to view current DHCP client information and to
always assign an IP address to a MAC address (and host name).
General Use this screen to enable NAT.
Application Use this screen to configure servers behind the NBG420N.
Advanced Use this screen to change your NBG420N's port triggering settings.
General Use this screen to set up dynamic DNS.
General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
Use this screen to block certain web features and sites containing
certain keywords in the URL.
Schedule Use this screen to set the days and times for the NBG420N to
perform content filtering.
General Use this screen to configure VPN connections and view the rule
summary.
SA Monitor Use this screen to display and manage active VPN connections.
IP Static Use this screen to configure IP static routes.
Route
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a
bandwidth management rule.
Monitor Use this screen to view the NBG420N's bandwidth usage and
allotments.
WWW Use this screen to configure through which interface(s) and from
which IP address(es) users can use HTTP to manage the
NBG420N.
Telnet Use this screen to configure through which interface(s) and from
which IP address(es) users can use Telnet to manage the
NBG420N.
FTP Use this screen to configure through which interface(s) and from
which IP address(es) users can use FTP to access the NBG420N.
DNS Use this screen to configure through which interface(s) and from
which IP address(es) users can send DNS queries to the
NBG420N.
General Use this screen to enable UPnP on the NBG420N.
Chapter 3 Introducing the Web Configurator
43