ZyXEL Communications ZyXEL NBG420N User Manual page 178

Chapter 15 IPSec VPN
Table 64 Security > VPN > Rule Setup: IKE (Advanced) (continued)
LABEL
IKE Phase 1
Negotiation Mode
Encryption Algorithm Select which key size and encryption algorithm to use in the IKE SA. Choices
Authentication
Algorithm
SA Life Time
(Seconds)
Key Group
Pre-Shared Key
IKE Phase 2
Encapsulation Mode
IPSec Protocol
Encryption Algorithm Select which key size and encryption algorithm to use in the IKE SA. Choices
178
DESCRIPTION
Select Main or Aggressive from the drop-down list box. Multiple SAs
connecting through a secure gateway must have the same negotiation mode.
are:
DES - a 56-bit key with the DES encryption algorithm
3DES - a 168-bit key with the DES encryption algorithm
The NBG420N and the remote IPSec router must use the same algorithms and
keys. Longer keys require more processing power, resulting in increased
latency and decreased throughput.
Select which hash algorithm to use to authenticate packet data in the IKE SA.
Choices are SHA1 and MD5. SHA1 is generally considered stronger than MD5,
but it is also slower.
Define the length of time before an IKE SA automatically renegotiates in this
field. It may range from 180 to 3,000,000 seconds (almost 35 days).
A short SA Life Time increases security by forcing the two VPN gateways to
update the encryption and authentication keys. However, every time the VPN
tunnel renegotiates, all users accessing remote resources are temporarily
disconnected.
Select which Diffie-Hellman key group (DHx) you want to use for encryption
keys. Choices are:
DH1 - use a 768-bit random number
DH2 - use a 1024-bit random number
Type your pre-shared key in this field. A pre-shared key identifies a
communicating party during a phase 1 IKE negotiation. It is called "pre-shared"
because you have to share it with another party before you can communicate
with them over a secure connection.
Type from 8 to 31 case-sensitive ASCII characters or from 16 to 62
hexadecimal ("0-9", "A-F") characters. You must precede a hexadecimal key
with a "0x" (zero x), which is not counted as part of the 16 to 62 character range
for the key. For example, in "0x0123456789ABCDEF", "0x" denotes that the key
is hexadecimal and "0123456789ABCDEF" is the key itself.
Both ends of the VPN tunnel must use the same pre-shared key. You will
receive a "PYLD_MALFORMED" (payload malformed) packet if the same pre-
shared key is not used on both ends.
Select Tunnel mode or Transport mode.
Select the security protocols used for an SA.
Both AH and ESP increase processing requirements and communications
latency (delay).
If you select ESP here, you must select options from the Encryption Algorithm
and Authentication Algorithm fields (described below).
are:
DES - a 56-bit key with the DES encryption algorithm
3DES - a 168-bit key with the DES encryption algorithm
The NBG420N and the remote IPSec router must use the same algorithms and
keys. Longer keys require more processing power, resulting in increased
latency and decreased throughput.
NBG420N User's Guide