Chapter 15 IPSec VPN
15.2.3.3 Authentication and the Security Parameter Index (SPI)
For authentication, the NBG420N and remote IPSec router use the SPI, instead of pre-shared
keys, ID type and content. The SPI is an identification number.
Note: The NBG420N and remote IPSec router must use the same SPI.
Figure 108 Security > VPN > General > Rule Setup: Manual
The following table describes the labels in this screen.
Table 65 Security > VPN > Rule Setup: Manual
LABEL
Property
Active
180
DESCRIPTION
Select this check box to activate this VPN policy.
NBG420N User's Guide