Figure 21-2 Advanced Wan Setup; Table 21-2 Advanced Wan Port Setup: At Commands Fields - ZyXEL Communications Prestige 792H User Manual

AT Command Strings:
Dial= atdt
Drop= ~~+++~~ath
Answer= ata
Drop DTR When Hang Up= Yes
AT Response Strings:
CLID= NMBR =
Called Id=
Speed= CONNECT

Table 21-2 Advanced WAN Port Setup: AT Commands Fields

FIELD
AT Command
Strings:
Dial Enter the AT Command string to make a call.
Drop Enter the AT Command string to drop a call. "~" represents a one
Answer Enter the AT Command string to answer a call.
Drop DTR When
Hang Up
AT Response String:
CLID (Calling Line
Identification)
Called Id Enter the keyword preceding the dialed number.
Dial Backup
Menu 2.1 - Advanced WAN Setup
Press ENTER to Confirm or ESC to Cancel:

Figure 21-2 Advanced WAN Setup

second wait, e.g., "~~~+++~~ath" can be used if your modem has a
slow response time.
Press the [SPACE BAR] to choose either
is selected (the default), the DTR (Data Terminal Ready) signal is
dropped after the "AT Command String: Drop" is sent out.
Enter the keyword that precedes the CLID (Calling Line Identification)
in the AT response string. This lets the Prestige capture the CLID in
the AT response string that comes from the WAN device. CLID is
required for CLID authentication.
Call Control:
Dial Timeout(sec)= 60
Retry Count= 0
Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Call Back Delay(sec)= 15
DESCRIPTION
Yes or No. When Yes
Prestige 792H User's Guide
DEFAULT
+++ath
NMBR =
atdt
ata
Yes
TO
21-3