Table of Contents
Advertisement
14. Session Option: Idle Timeout (sec) - This value specifies the
Once you have completed filling in Menu 11.1 - Remote Node Profile,
press ENTER at the message: Press ENTER to Confirm ... to confirm
your selections, or press ESC at any time to cancel your selections.
Editing PPP Options
1. Encapsulation - Select CCP (Compression Control Protocol) for
and your Prestige. You can choose from 12 different filter sets. In
addition, you can link up to 4 filter sets together for further
customization (e.g., 1, 5, 9, 12). Note that spaces and , are
accepted in this field.
For more information on customizing your filter sets, see Chapter 9.
The default is blank, i.e., no filters defined.
number of idle seconds that elapses before sending a ppp-echo
packet to verify whether the line is up.
Figure 5-3 Remote Node PPP Options
the PPP or MP link. There are two options in this field.
Standard PPP - Standard PPP options will be used.
CISCO PPP - Cisco PPP options will be used.
Remote Node Configuration 43
Advertisement
Table of Contents
