Table of Contents
Advertisement
The figure below shows an example of a small office connected to the
Internet via a Single User Account using your Prestige. Note that if you
enable the Single User Account feature, your local IP address MUST
be selected from the list of IP addresses for private networks as defined
by the IANA.
Configuration for Single User Account
The steps for configuring your Prestige for Single User Internet Access
are identical to conventional Internet access with the exception that you
need to fill in three extra fields.
Follow steps 1-8 from the previous section, Internet Access
Configuration.
1. Single User Account - Enter Yes to enable the Single User
2. Single User Account: IP Addr - If your ISP assigns you a
36 Configuring for Internet Access
UDP and TCP datagrams can be routed. In addition, ICMP echo
can also be routed.
Figure 4-3 A Single User Account Using the Prestige
Account feature. Use the space bar to toggle between Yes and No.
dynamic IP address, enter 0.0.0.0 here. If your ISP assigns you a
Advertisement
Table of Contents
