ZyXEL Communications Prestige 128L User Manual page 86

13. More - In this field, you can determine if you want to pass the
14. Log - In this field, you can determine if you wish to log the results of
15. Action Matched - If the conditions for the filter rule are met, you
74 Filter Configuration
(TCP protocol). In this field you determine what type of TCP
packets to filter. There are two options:
Yes - filter matches only established TCP connections.
No - filter matches both initial and established TCP
connections.
packet through the next filter rule before any action is taken. There
are two options for this field:
Yes.
No.
If More is Yes, then Action Matched and Action Not Matched will
be N/A.
packets attempting to pass the filter rule. These results will be
displayed on the System Log (see Chapter 13). There are 4 options
for this field:
None - No packets will be logged.
Action Matched - Only packets that match the rule parameters
will be logged.
Action Not Matched - Only packets that do not match the rule
parameters will be logged.
Both - All packets will be logged.
can specify what to do with the packet. There are three options for
this field:
Check Next Rule.
Forward.
Drop.