Table of Contents
Advertisement
21.1.2 Procedure to Configure Dynamic DNS
To configure Dynamic DNS, go to Menu 1 — General Setup and select Yes in the Edit
Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS as
shown next.
Figure 123 Menu 1.1 Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= No
DDNS Type= DynamicDNS
Host Name 1=
Host Name 2=
Host Name 3=
Username=
Password= ********
Enable Wildcard Option= No
Enable Off Line Option= N/A
IP Address Update Policy:
DDNS Server Auto Detect IP Address= No
Use Specified IP Address= No
Use IP Address= N/A
Press Space Bar to Toggle.
Follow the instructions in the next table to configure Dynamic DNS parameters.
Table 85 Menu 1.1 Configure Dynamic DNS
FIELD
Service Provider
Active
DDNS Type
Host 1- 3
User
Password
Chapter 21 General Setup
Note: If you have a private WAN IP address, then you cannot
use Dynamic DNS
Menu 1.1 - Configure Dynamic DNS
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This is the name of your Dynamic DNS service provider.
Press [SPACE BAR] to select Yes and then press [ENTER] to make dynamic DNS
active.
Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have a
dynamic IP address(es). Select StaticDNS if you have a static IP address(s).
Select CustomDNS to have dyns.org provide DNS service for a domain name that
you already have from a source other than dyndns.org.
Enter your host name(s) in the fields provided. You can specify up to two host
names separated by a comma in each field.
Enter your user name.
Enter the password assigned to you.
ZyAIR G-2000 Plus User's Guide
260
Advertisement
Table of Contents
Troubleshooting
