Table of Contents
Advertisement
This chapter shows you how to configure your ZyAIR firewall.
15.1 Access Methods
The web configurator is, by far, the most comprehensive firewall configuration tool your
ZyAIR has to offer. For this reason, it is recoZyAIRmmended that you configure your firewall
using the web configurator. SMT screens allow you to activate the firewall. CLI commands
provide limited configuration options and are only recommended for advanced users, please
refer to the Appendix for firewall CLI commands.
15.2 Firewall Policies Overview
Firewall rules are grouped based on the direction of travel of packets to which they apply:
• LAN to LAN/ZyAIR
• LAN to WAN
By default, the ZyAIR's stateful packet inspection allows packets traveling in the following
directions:
• LAN to LAN/ZyAIR
This allows computers on the LAN to manage the ZyAIR and communicate between
networks or subnets connected to the LAN interface.
• LAN to WAN
By default, the ZyAIR's stateful packet inspection blocks packets traveling in the following
directions:
• WAN to LAN
• WAN to WAN/ZyAIR
This prevents computers on the WAN from using the ZyAIR as a gateway to
communicate with other computers on the WAN and/or managing the ZyAIR.
Chapter 15 Firewall Screens
C
Firewall Screens
• WAN to LAN
• WAN to WAN/ZyAIR
Note: The LAN includes both the LAN port and the WLAN.
ZyAIR G-2000 Plus User's Guide
H A P T E R
1 5
192
Advertisement
Table of Contents
Troubleshooting
