Table of Contents
Advertisement
Figure 229 Macintosh OS X: Network
4 For statically assigned settings, do the following:
5 Click Apply Now and close the window.
6 Turn on your ZyAIR and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Appendix C
•
From the Configure box, select Manually.
•
Type your IP address in the IP Address box.
•
Type your subnet mask in the Subnet mask box.
•
Type the IP address of your ZyAIR in the Router address box.
ZyAIR G-2000 Plus User's Guide
390
Advertisement
Table of Contents
Troubleshooting
