Back To Factory Defaults; Restart Screen; Figure 112 Configuration Upload Error; Figure 113 Reset Warning Message - ZyXEL Communications ZyAIR G-2000 Plus User Manual

802.11g wireless 4-port router

Hide thumbs Also See for ZyAIR G-2000 Plus:

Table of Contents

19.6.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and

returns the ZyAIR to its factory defaults as shown on the screen. The following warning screen

will appear.

You can also press the RESET button on the side panel to reset the factory defaults of your

ZyAIR. Refer to the section on resetting the ZyAIR for more information on the RESET

System restart allows you to reboot the ZyAIR without turning the power off.

Click MAINTENANCE, and then Restart. Click Restart to have the ZyAIR reboot. This

does not affect the ZyAIR's configuration.

Chapter 19 Maintenance

ZyAIR G-2000 Plus User's Guide