Figure 133 Menu 4 Internet Access Setup; Table 92 Internet Access Setup - ZyXEL Communications ZyAIR G-2000 Plus User Manual

ZyAIR G-2000 Plus User's Guide
Figure 133
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 92 Internet Access Setup (Ethernet
FIELD
ISP's Name
Encapsulation
Service Type
Note: DSL users must choose the Standard option only. The My Login, My Password and Login
Server fields are not applicable in this case.
My Login
My Password
Retype to Confirm
Login Server
Relogin Every (min)
IP Address Assignment If your ISP did not assign you a fixed IP address, press [SPACE BAR] and
IP Address
275
Menu 4 Internet Access Setup
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)=
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Enter the name of your Internet Service Provider, e.g., myISP. This
information is for identification purposes only.
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for the IP Address field.
Press [SPACE BAR] and then [ENTER] to select Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner
Manager authentication method), RR-Telstra or Telia Login. Choose a
RoadRunner flavor if your ISP is Time Warner's RoadRunner; otherwise
choose Standard.
Enter the login name given to you by your ISP.
Type your password again for confirmation.
Enter your password again to make sure that you have entered is correctly.
The ZyAIR will find the RoadRunner Server IP if this field is left blank. If it
does not, then you must enter the authentication server IP address.
This field is available when you select Telia Login in the Service Type field.
The Telia server logs the ZyAIR out if the ZyAIR does not log in periodically.
Type the number of minutes from 1 to 59 (30 recommended) for the ZyAIR to
wait between logins.
then [ENTER] to select Dynamic, otherwise select Static and enter the IP
address and subnet mask in the following fields.
Enter the (fixed) IP address assigned to you by your ISP (static IP address
assignment is selected in the previous field).
N/A
DESCRIPTION
Chapter 24 Internet Access