Table of Contents
Advertisement
The chapter shows you the information on general setup.
21.1 General Setup
Menu 1 — General Setup contains administrative and system-related information (shown
next). The System Name field is for identification purposes. However, because some ISPs
check this name you should enter your computer's "Computer Name".
In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification
tab, note the entry for the Computer name field and enter it as the ZyAIR System Name.
In Windows 2000 click Start, Settings, Control Panel and then double-click System. Click
the Network Identification tab and then the Properties button. Note the entry for the
Computer name field and enter it as the ZyAIR System Name.
In Windows XP, click start, My Computer, View system information and then click the
Computer Name tab. Note the entry in the Full computer name field and enter it as the
ZyAIR System Name.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. While you
must enter the host name (System Name) on each individual computer, the domain name can
be assigned from the ZyAIR via DHCP.
21.1.1 Procedure To Configure Menu 1
Enter 1 in the Main Menu to open Menu 1 – General Setup as shown next.
Chapter 21 General Setup
ZyAIR G-2000 Plus User's Guide
C
H A P T E R
General Setup
2 1
258
Advertisement
Table of Contents
Troubleshooting
