Figure 57 Sua/Nat Setup; Table 44 Sua/Nat Setup - ZyXEL Communications ZyAIR G-2000 Plus User Manual

Figure 57 SUA/NAT Setup

The following table describes the labels in this screen.

Table 44 SUA/NAT Setup

LABEL
Default Server
#
Active
Name
Start Port
End Port
Server IP
Address
Chapter 10 Single User Account (SUA) / Network Address Translation (NAT)
DESCRIPTION
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen.
If you do not assign a Default Server IP Address, the ZyAIR discards all packets
received for ports that are not specified in this screen or remote management.
Number of an individual SUA server entry.
Select this check box to enable the SUA server entry. Clear this checkbox to
disallow forwarding of these ports to an inside server without having to delete the
entry.
Enter a name to identify this port-forwarding rule.
Enter a port number here. To forward only one port, enter it again in the End Port
field. To specify a range of ports, enter the last port to be forwarded in the End Port
field.
Enter the inside IP address of the server here.
ZyAIR G-2000 Plus User's Guide
144