Table of Contents
Advertisement
Figure 51 PPTP Encapsulation
The following table describes the labels in this screen.
Table 39 PPTP Encapsulation
LABEL
ISP Parameters for Internet Access
Encapsulation
User Name
Password
Retype to Confirm
Nailed-up Connection
Idle Timeout
Chapter 9 WAN
DESCRIPTION
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables
secure transfer of data from a remote client to a private server, creating a
Virtual Private Network (VPN) using TCP/IP-based networks. PPTP supports
on-demand, multi-protocol, and virtual private networking over public
networks, such as the Internet. The ZyAIR supports only one PPTP server
connection at any given time.
To configure a PPTP client, you must configure the User Name and
Password fields for a PPP connection and the PPTP parameters for a PPTP
connection.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Type your password again to make sure that you have entered is correctly.
Select Nailed-Up Connection if you do not want the connection to time out.
This value specifies the time in seconds that elapses before the ZyAIR
automatically disconnects from the PPTP server.
ZyAIR G-2000 Plus User's Guide
130
Advertisement
Table of Contents
Troubleshooting
