Figure 16 Status: Packet Statistics; Table 8 Status: Packet Statistics - ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series User Manual

Figure 16 Status: Packet Statistics

The following table describes the fields in this screen.

Table 8 Status: Packet Statistics

LABEL
System Monitor
System up Time
Current Date/Time
CPU Usage
Memory Usage
LAN or WAN Port
Statistics
Link Status
Upstream Speed
Downstream Speed This is the downstream speed of your ZyXEL Device.
Node-Link
Interface
Status
TxPkts
RxPkts
Errors
Chapter 2 Introducing the Web Configurator
DESCRIPTION
This is the elapsed time the system has been up.
This field displays your ZyXEL Device's present date and time.
This field specifies the percentage of CPU utilization.
This field specifies the percentage of memory utilization.
This is the WAN or LAN port.
This is the status of your WAN link.
This is the upstream speed of your ZyXEL Device.
This field displays the remote node index number and link type. Link types are
PPPoA, ENET, RFC 1483 and PPPoE.
This field displays the type of port.
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
For the WLAN port, it displays the transmission rate when WLAN is enabled or N/
A when WLAN is disabled.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
P-662H/HW-D Series User's Guide
61