Configuring Ftp; Figure 166 Remote Management: Telnet; Table 126 Remote Management: Telnet - ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series User Manual

P-662H/HW-D Series User's Guide

Figure 166 Remote Management: Telnet

The following table describes the labels in this screen.

Table 126 Remote Management: Telnet

LABEL
Port
Access Status
Secured Client IP A secured client is a "trusted" computer that is allowed to communicate with the
Apply
Cancel

21.5 Configuring FTP

You can upload and download the ZyXEL Device's firmware and configuration files using
FTP, please see the chapter on firmware and configuration file maintenance for details. To use
this feature, your computer must have an FTP client.
To change your ZyXEL Device's FTP settings, click Advanced > Remote MGMT > FTP
tab. The screen appears as shown.
312
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Chapter 21 Remote Management Configuration