Wpa(2) Authentication Screen; Figure 66 Wireless: Wpa(2) - ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series User Manual

P-662H/HW-D Series User's Guide
Table 40 Wireless: WPA(2)-PSK
LABEL
Group Key Update
Timer (In
Seconds)
Apply
Cancel
Advanced Setup

7.5.4 WPA(2) Authentication Screen

In order to configure and enable WPA(2) Authentication; click the Wireless LAN link under
Network to display the Wireless screen. Select WPA or WPA2 from the Security Mode list.

Figure 66 Wireless: WPA(2)

132
DESCRIPTION
The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK
key management) or RADIUS server (if using WPA(2) key management) sends a
new group key out to all clients. The re-keying process is the WPA(2) equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis. Setting of the Group Key Update Timer is also supported in
WPA(2)-PSK mode. The ZyXEL Device default is 1800 seconds (30 minutes).
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
Chapter 7 Wireless LAN