P-662H/HW-D Series User's Guide
Figure 33 Manually assign a WPA key
The following table describes the labels in this screen.
Table 17 Manually assign a WPA key
LABEL
Pre-Shared
Key
Back
Next
Exit
3.3.3 Manually assign a WEP key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Figure 34 Manually assign a WEP key
76
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 3 Wizard Setup for Internet Access