Status: Packet Statistics; Figure 9 Status > Packet Statistics; Table 4 Status > Packet Statistics - ZyXEL Communications P-793H User Manual

2.4.2 Status: Packet Statistics

Click the Packet Statistics hyperlink in the Status screen. Read-only information here
includes port status and packet specific statistics. Also provided are "system up time" and "poll
interval(s)". The Poll Interval(s) field is configurable.
Figure 9 Status > Packet Statistics
The following table describes the fields in this screen.
Table 4 Status > Packet Statistics
LABEL
System Monitor
System up Time
Current Date/Time
CPU Usage
Memory Usage
WAN Port Statistics
Link Status
WAN IP Address
Upstream Speed
Downstream Speed This is the downstream speed of your ZyXEL Device.
Node-Link
Status
TxPkts
Chapter 2 Introducing the Web Configurator
DESCRIPTION
This is the elapsed time the system has been up.
This field displays your ZyXEL Device's present date and time.
This field specifies the percentage of CPU utilization.
This field specifies the percentage of memory utilization.
This is the status of your WAN link.
This is the IP address assigned to your ZyXEL Device on the WAN.
This is the upstream speed of your ZyXEL Device.
This field displays the remote node index number and link type. Link types are
PPPoA, ENET, RFC 1483 and PPPoE.
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation. It displays N/A if the port is
not connected.
This field displays the number of packets transmitted on this port.
P-793H User's Guide
53