Figure 6 Password Screen; Figure 7 Change Password At Login - ZyXEL Communications 802.11g ADSL 2+ 4-Port Security Gateway HW-D Series User Manual

P-662H/HW-D Series User's Guide
only. Click Login to proceed to a screen asking you to change your password or click
Cancel to revert to the default password.

Figure 6 Password Screen

6 If you entered the user password, skip the next two steps and refer to
page 55
If you entered the admin password, it is highly recommended you change the default
admin password! Enter a new password between 1 and 30 characters, retype it to confirm
and click Apply; alternatively click Ignore to proceed to the main menu if you do not
want to change the password now.
Note: If you do not change the password at least once, the following screen appears
every time you log in with the admin password.

Figure 7 Change Password at Login

7 It is highly recommended you replace the factory default certificate by creating your own
unique certificate based on your ZyXEL Device's MAC address. Click Apply to create
the certificate, alternatively click Ignore to proceed to the next menu if you do not want
to replace the certificate now.
50
for more information about the Status screen.
Chapter 2 Introducing the Web Configurator
Section 2.4.2 on