Table of Contents
Advertisement
P-662H/HW-D Series User's Guide
Figure 159 Bandwidth Management: Summary
The following table describes the labels in this screen.
Table 120 Media Bandwidth Management: Summary
LABEL
Interface
Active
Speed (kbps) Enter the amount of bandwidth for this interface that you want to allocate using
Scheduler
Max
Bandwidth
Usage
Apply
Cancel
298
DESCRIPTION
These read-only labels represent the physical interfaces. Select an interface's check
box to enable bandwidth management on that interface. Bandwidth management
applies to all traffic flowing out of the router through the interface, regardless of the
traffic's source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the ZyXEL
Device and be managed by bandwidth management.
Select an interface's check box to enable bandwidth management on that interface.
bandwidth management.
This appears as the bandwidth budget of the interface's root class. The
recommendation is to set this speed to match what the interface's connection can
handle. For example, set the WAN interface speed to 10000 kbps if the DSL connection
has an upstream speed of 10Mbps.
Select either Priority-Based or Fairness-Based from the drop-down menu to control
the traffic flow.
Select Priority-Based to give preference to bandwidth classes with higher priorities.
Select Fairness-Based to treat all bandwidth classes equally.
Select this check box to have the ZyXEL Device divide up all of the interface's
unallocated and/or unused bandwidth among the bandwidth classes that require
bandwidth. Do not select this if you want to reserve bandwidth for traffic that does not
match a bandwidth class or you want to limit the speed of this interface (see the Speed
field description).
Click Apply to save your settings back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 19 Bandwidth Management
Advertisement
Table of Contents
Troubleshooting
