Status: Packet Statistics; Figure 10 Status > Packet Statistics; Table 4 Status > Packet Statistics - ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H User Manual

2.4.2 Status: Packet Statistics

Click the Packet Statistics hyperlink in the Status screen. Read-only information here
includes port status and packet specific statistics. Also provided are "system up time" and "poll
interval(s)". The Poll Interval(s) field is configurable.
Figure 10 Status > Packet Statistics
The following table describes the fields in this screen.
Table 4 Status > Packet Statistics
LABEL
System Monitor
System up Time
Current Date/Time
CPU Usage
Memory Usage
WAN Port Statistics
Link Status
WAN IP Address
Transfer Rate
Node-Link
Status
TxPkts
RxPkts
Errors
Tx B/s
P-793H User's Guide
DESCRIPTION
This is the elapsed time the system has been up.
This field displays your ZyXEL Device's present date and time.
This field specifies the percentage of CPU utilization.
This field specifies the percentage of memory utilization.
This is the status of your WAN link.
This is the IP address assigned to your ZyXEL Device on the WAN.
This is the rate at which information is flowing to/from the ZyXEL Device.
This field displays the remote node index number and link type. Link types are
PPPoA, ENET, RFC 1483 and PPPoE.
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation. It displays N/A if the port
is not connected.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
Chapter 2 Introducing the Web Configurator
51