Example Of Firmware Upload Using Ftp - ZyXEL Communications NWA Series User Manual

Fig ure 104
The following table describes the labels in this screen.
Table 73 Maintenance > File Manager > Firmware Package
L ABEL
Boot Module
Current Version
Released Date
File Path
Browse...
Upload
After you see the
Device again.
Note: The Zyxel Device automatically reboots after a successful upload.
The Zyxel Device automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Fig ure 105
After five minutes, log in again and check your new firmware version in the
18.3.1 Exa m ple o f Firm wa re Uplo a d Using FT P
This procedure requires the Zyxel Device's firmware. Download the firmware package from
www.zyxel.com and unzip it. The firmware file uses a .bin extension, for example, "600ABFH0C0.bin". Do
the following after you have obtained the firmware file.
1
Connect your computer to the Zyxel Device.
2
The FTP server IP address of the Zyxel Device in standalone mode is 192.168.1.2, so set your computer to
use a static IP address from 192.168.1.3 ~192.168.1.254.
Chapter 18 File Manager
Maintenance > File Manager > Firmware Package
DESC RIPT IO N
This is the version of the boot module that is currently on the Zyxel Device.
This is the firmware version and the date created.
This is the date that the version of the firmware was created.
Type in the location of the file you want to upload in this field or click
Click Bro wse ... to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Uplo a d
Click to begin the upload process. This process may take up to two minutes.
Firm wa re Uplo a d in Pro c e ss
Network Temporarily Disconnected
NWA/WAC/WAX Series User's Guide
screen, wait two minutes before logging into the Zyxel
174
Bro wse ...
to find it.
Da shb o a rd screen.