Siemens SIRIUS 3RW5 Equipment Manual page 67

5.2.2.2 Removing the bus connection cable
Requirements
● Diagonal cutter
● Slotted screwdriver with blade width < 2.5 mm
Procedure
Illustration similar
1. Carefully cut through the cable ties with a diagonal cutter and remove the cable tie. Take
care that you do not damage the cable.
2. Use the flat-head screwdriver to operate the pressure element on an inserted core and
keep the pressure element pressed.
3. Pull the core on the operated pressure element out.
4. Repeat the procedure for the inserted cores.
Result
You have disconnected the 3RW5 communication module from the bus connection.
SIRIUS 3RW5 Modbus communication module
Equipment Manual, 03/2020, A5E43676481002A/RS-AC/003
Connecting
5.2 Fieldbus
67