Siemens SIRIUS 3RW5 Equipment Manual page 52

Mounting and dismantling
4.3 Installing the 3RW5 communication module on a level surface
Procedure
Illustration similar
1. Insert the push-in lugs into each side of the enclosure until you hear them engage.
2. Position the 3RW5 communication module on the level surface over the drill-holes and
insert the head screws.
3. Attach the 3RW5 communication module on the bottom and top side of the level surface
using the head screws.
Result
You have mounted the 3RW5 communication module on a level surface. You can connect
the COM connecting cable to the 3RW50 soft starter (Page 55) and on the
3RW5 communication module (Page 57) and connect the 3RW50 soft starter to the fieldbus
via the 3RW5 Modbus TCP communication module (Page 61) or 3RW5 Modbus RTU
communication module (Page 64).
52
SIRIUS 3RW5 Modbus communication module
Equipment Manual, 03/2020, A5E43676481002A/RS-AC/003