Changing The Drum/Bass Sequence Volume Level - Zoom HD16 Operation Manual

PATTERN EDIT 1/8 PATTERN EDIT 1/8
>QUANTIZE >QUANTIZE
3.
Use the cursor left/right keys to bring up the
indication "ORIGINAL ROOT" on the second
line of the display, and press the [ENTER] key.
This screen allows you to specify the root for the selected
rhythm pattern.
Original Root Original Root
E
Chord root
4.
Turn the dial to select the root for the chord.
The available range is C – B (default setting: E). When setting
chord information for a rhythm song, the root specified here
will become the default.
5.
When the setting is complete, press the
[EXIT] key.
The rhythm pattern edit menu appears again.
6.
Use the cursor left/right keys to bring up the
indication "ORIGINAL CHORD" on the
second line of the display, and press the
[ENTER] key.
This screen allows you to specify the chord type for the
selected rhythm pattern.
Original Chord Original Chord
Major Major
7.
Turn the dial to select the chord.
For the chord type, you can select Major or Minor.
For example, if you have entered a bass phrase with a G major
chord in mind, set the root to "G" and the chord type to
"Major".
8.
When the setting is complete, press the
[EXIT] key.
The setting is entered and the rhythm pattern edit menu
appears again.
9.
To return to the main screen, press the [EXIT]
key several times.
ZOOM HD8/HD16
Changing the drum/bass
sequence volume level
Normally, the playback volume of the rhythm pattern can be
adjusted with the [RHYTHM] fader for the drum and bass. If
necessary, the volume levels can also be individually
programmed for each rhythm pattern.
1.
From the main screen, hold down the [SHIFT]
key and press pad 7 (PATTERN) so that the
pad lights up.
The rhythm pattern selection screen appears.
2.
Turn the dial to select the rhythm pattern for
which to set the volume, and press the [EDIT]
key.
The rhythm pattern edit menu appears.
PATTERN EDIT 1/8 PATTERN EDIT 1/8
>QUANTIZE >QUANTIZE
3.
Use the cursor left/right keys to bring up the
indication "DRUM LEVEL" on the second line
of the display, and press the [ENTER] key.
This screen allows you to specify the drum sequence volume.
The display shows the current volume setting (1 – 15).
Drum Level Drum Level
15 15
4.
Turn the dial to select the desired setting, and
then press the [EXIT] key.
The setting is entered, and the rhythm pattern edit menu
appears again.
5.
Use the cursor left/right keys to bring up the
indication "BASS LEVEL" on the second line
of the display, and press the [ENTER] key.
This screen allows you to specify the bass sequence volume.
The display shows the current volume setting (1 – 15).
Bass Level Bass Level
15 15
6.
Turn the dial to select the desired setting, and
then press the [EXIT] key.
The setting is entered, and the rhythm pattern edit menu
appears again.
Reference [Rhythm]
99